NETGEAR ReadyDATA 516 Hardware Manual page 23

d. Push the mounting bracket out of each bracket lock using a pointed object, such as
a pen.
The mounting bracket is released from the bracket lock.
e. Slide the mounting bracket out of the disk tray.
The mounting bracket is not used to secure 2.5-inch HDDs or SSDs.
5. Place the new 2.5-inch HDD or SSD in the disk tray.
6. Secure the HDD or SSD to the disk tray using the screws that came with your storage
system.
Make sure that the HDD or SSD connectors face the interior of the disk tray.
ReadyDATA Desktop Storage Systems
Disks
23