Using The Metrology Mode - Mio DigiWalker A702 User Manual

3. Tap the down arrow next to the output field to open the currency list, and
select the currency to convert to (target currency). When a currency is
selected, the abbreviation of the currency will be displayed on the
upper-left corner of the output field.
4. Enter the currency value in the input field using the numeric keypad. The
converted currency value immediately appears in the output field.
You can also perform basic arithmetic operations in the input field.
NOTE: The program uses the default exchange rates unless you change them. (See
the following sub-section for information.)
Editing the Exchange Rate
Before performing the currency conversion, you can edit the exchange rate
to the most up-to-date one.
1. Tap the
2. Select the source and target currencies.
3. Tap the
exchange rate fields.
4. Enter the exchange rate, and tap the
button to save the setting and return to
the currency screen.
The program uses the European Euro
(EUR) as the based currency.
NOTE: To return to the currency screen
without saving the setting, tap the

Using the Metrology Mode

The Metrology mode allows you to convert measures from one unit to
another.
1. Tap the
Mio Programs
button to switch to the Currency mode.
button to display the
button to switch to the Metrology mode.
button.
8-11