Taking Continuous Pictures; Adding The Gps Stamp Into The Picture - Mio DigiWalker A702 User Manual

5. The picture (JPG format) will be saved automatically. If a storage card is
inserted, the file will be saved in the \Storage Card\My Pictures folder.
Otherwise, the file will be saved in the \My Device\My Documents\My
Pictures folder on the device.
6. To view the saved picture, tap
section 7.4 for information.)
7. To exit the program, tap

Taking Continuous Pictures

While in the Camera mode, you can switch to the Continuous mode to take 3
continuous pictures with a single press of the Camera button.
Tap
mode. Take pictures according to the instructions described in the "Taking
Pictures" section.
NOTE: The flash is turned off automatically in the Continuous mode.

Adding the GPS Stamp into the Picture

The program incorporates an additional GPS Stamp function. With this
function, the longitude and latitude information of the location where you
take a picture can be added into the meta data of the picture. You can then
use the optional navigation program to navigate to the location where the
picture was taken.
Camera
to enter the viewing mode. (See
.
. The icon indicates the Continuous
7-3