Store A Contact In Memory; Make A Call From Memory; Delete A Contact; Bluetooth Mode Settings - JVC KD-X310BT Instruction Manual

You can store up to 6 contacts.
Press to enter Bluetooth mode.
Turn the volume knob to select [RECENT CALL], [PHONEBOOK], or
[DIAL NUMBER], then press the knob.
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
Press and hold one of the number buttons (1 to 6).
"MEMORY P(selected preset number)" appears when the contact is
stored.
To erase a contact from the preset memory, select [DIAL NUMBER] in
step and store a blank number.
Press to enter Bluetooth mode.
Press one of the number buttons (1 to 6).
Press the volume knob to call.
"NO PRESET" appears if there is no contacts stored.
Not applicable for mobile phone that supports PBAP.
Press to enter Bluetooth mode.
Turn the volume knob to select [RECENT CALL] or [PHONEBOOK], then
press the knob.
Turn the volume knob to select a contact or a phone number.
Press and hold G PTY.
Turn the volume knob to select [DELETE] or [DELETE ALL], then press
the knob.
DELETE: Selected name or phone number in step is deleted.
DELETE ALL: All names or phone numbers from the selected menu in
step is deleted.
Turn the volume knob to select [YES] or [NO], then press the knob.
Press and hold MENU.
Turn the volume knob to select [BLUETOOTH], then press the knob.
Turn the volume knob to make a selection (see the following table),
then press the knob.
Press MENU to exit.
To return to the previous setting item or hierarchy, press G PTY.
PHONE
Selects the phone or audio device to connect or disconnect.
" " appears in front of the device name.
AUDIO
APPLICATION Shows the connected phone name using the JVC Smart Music Control *
app. " " appears in front of the device name.
DELETE PAIR Turn the volume knob to select a device to delete, then press the
knob.
Turn the volume knob to select [YES] or [NO], then press the knob.
PRIORITY Selects a device to be connected as priority device. " " appears in front
of the device name set as priority.
• "NO PAIR" appears if there is no registered device found.
2
P.BOOK WAIT * Copies up to 400 numbers from the phonebook memory of a connected
phone.
SET PINCODE Changes the PIN code (up to 6 digits).
(0000) Turn the volume knob to select a number.
Press S / T to move the entry position.
Repeat steps and until you finish entering the PIN code.
Press the volume knob to confirm.
* 1
JVC Smart Music Control is designed to view JVC car receiver status
and perform simple control operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website:
<http://www.jvc.net/cs/car/>.
* 2
Selectable only when the connected phone supports OPP.
Default: XX
1
ENGLISH | 17