Adding And Managing Volumes; Shares In Volumes; To Add A New Volume - Iomega StorCenter px2-300d User Manual

Adding and Managing Volumes

A volume is a single accessible storage area with an allocated size. You can create volumes after
creating Storage Pools.

Shares in Volumes

All Shares on the Iomega StorCenter px2-300d are added to volumes, and the size of the Share is
limited by the free space of the volume. When you create a Share, you can add it to a volume at the
same time. This is the simplest method for adding a Share to a volume. For more information on
adding Shares to volumes, refer to
volumes, and the size of the iSCSI drive is limited by the free space of the volume. When you create
an iSCSI drive, you can add it to a volume at the same time. This is the simplest method for creating
iSCSI drives. For more information on adding iSCSI drives, refer to

To add a new volume:

1. On the Drive Management page, expand a Storage Pool, expand the Volumes section, and click
Add a Volume.
2. In the Information section, enter a name for the volume in the Volume field.
3. In the Size (GB) field, enter a size in gigabytes (GB) for the volume. Note that both the
allocated and available space for the volume displays. When you create a new volume, you can
optionally enable encryption to protect your data if your px2-300d is lost or stolen. You can
only enable encryption when you create a volume. Enabling encryption can reduce
performance since information transferred to and from the drives must be processed using the
256-bit Advanced Encryption Standard (AES) protocol. To apply encryption to a volume, click
the Enable encryption checkbox. There are two options for encryption: allowing the system to
generate a passphrase, or creating one yourself. The passphrase is not a 256-bit encryption
key.

Generate and save passphrase on the system — Select this option to allow the system
to store a passphrase for the volume. This type of encryption works only when the px2-
300d is powered down. If any drives are removed while your system is powered down,
data on the encrypted volume will not be accessible. When the px2-300d is rebooted,
the system-generated passphrase is automatically applied to the encrypted volume,
unlocking it and enabling data access.

Enter a passphrase — This is a more secure type of encryption and is the recommended
option. Click the Enter a passphrase option; then enter and verify a passphrase for the
volume. You can change the passphrase at any time. After restarting the px2-300d , an
encrypted volume is unavailable until you re-enter the passphrase. Note that the
passphrase must consist of eight or more characters.
After you create a passphrase, a new section for the volume appears called Volume
Encryption. When you want to unlock a volume, enter the passphrase in this section.
Note: It is recommended that you save a backup of the master key file in a secure location,
separate from your px2-300d . You should not save the backup master key to a drive that is
connected to your px2-300d . If a system failure occurs, the passphrase stored on your px2-
300d may be lost, and your backup master key file is required to recover and access your
data. Also, if you forget your passphrase, you can reset it using the backed-up master key.
Click Back up master key to back up the master key file. To reset the passphrase, click
Reset passphrase with master key, then enter a new passphrase and verify it.
Managing Shares. All iSCSI drives on the px2-300d are added to
Storage Pool Management
Managing iSCSI Drives.
55