Bluetooth File Sharing - Iomega StorCenter px2-300d User Manual

Iomega StorCenter px2-300d User Guide

Bluetooth File Sharing

Once a Bluetooth adapter is detected, files can be uploaded to a configurable destination Share on
the px2-300d from a Bluetooth device.
Configuring Bluetooth settings
1. To enable Bluetooth, click the switch on.
2. Once Bluetooth Transfer is enabled, check the Enable security checkbox to require Bluetooth
users to supply a unique PIN that they have defined before allowing them to transfer files to
the destination Share on the px2-300d. If you have
PIN number, which will be supplied by devices attempting to upload data using Bluetooth.
3. To set the destination Share, click
4. Click Apply to save your settings.
Note: To change any Bluetooth settings, click
26
enabled security, you must define a unique
.
.