Obtaining Alerts About Your Iomega Storcenter Px2-300D - Iomega StorCenter px2-300d User Manual

Iomega StorCenter px2-300d User Guide

Obtaining Alerts About Your Iomega StorCenter px2-300d

You can configure your px2-300d to send email alerts when problems are detected. This is done
through the email notification feature. Email notification provides a destination for emails sent by
the px2-300d when problems are detected. To provide a destination email address, enter the
following information:

Destination Email Addresses — enter a valid email address or addresses. This email address
provides a destination for messages sent by the px2-300d when problems are detected by the
system. You can add multiple email addresses by separating them with commas, spaces or
semicolons.

Check Send a test email message to confirm that email notification is working properly.

Check Configure custom SMTP settings only if your network blocks SMTP traffic, requiring
additional credentials, such as a corporate firewall. Most users will not need to check this
option. If checked, enter the following additional information to identify your SMTP server:


Email Server (SMTP) — enter the address of your SMTP server.

Sender Email Address — enter an email address for the px2-300d to use as the From
address when it creates messages.

Email Login — enter the username used to log into the email account you entered
above.

Email Password — enter the password for the email account.

Confirm Password — confirm the password for the email account. It must match the
password provided above.
Note: If your email application uses a SPAM blocker, it is recommended that you add a
sender email address to your safe list. If you do not define additional credentials, the
default sender email is: sohostorage@emc.com
Click Apply to save your changes.
12