Advertisement
CHECk BEFORE RIDINg
q Triple Collar Clamp (on select models only)
Using a 5mm Allen wrench, check that the collar clamp bolts are tightened securely.
q Quad Collar Clamp (on select models only)
Using a 5mm Allen wrench, check that the collar clamp bolts are tightened securely.
q Wheels and Bearings
Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it
is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper
tightness and bearings for side-to-side play and loose parts. When a wheel or wheel bearing develops play, this is an
indication of excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Worn
wheels/bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels other than
genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genuine Razor
replacement parts may affect your safety and will void your warranty.
q Cleaning your Scooter
Wipe with a damp cloth to remove dirt and dust.
Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or am-
monia-based cleaners as they may damage or dissolve the plastic components or soften the decals or decal adhesive.
q How to Ride
Place one foot on the baseboard, push forward with the other foot. Steer. For enhanced cornering, lean slightly into the
direction of the turn. For controlled stops, apply the brake by stepping on the rear fender/brake. Razor recommends that
you practice applying the brake at various speeds and in an open area free from obstructions before riding your Razor
scooter around others.
WaRNINg: Wheelies
and other stunt-type riding reduces
your ability to maneuver and control
your scooter. Take the necessary
precautions, such as wearing
appropriate protective gear and
practice in an area safe for stunt
riding and free from obstructions.
Advertisement
