American Standard Silhouette ASME A112.19.4M Specification Sheet

CHANDLER™ AMERICAST
• Americast brand engineered material
®
• Single bowl design
• Titanium enamel - heat resistant up to 1000°
• Acid-resisting glossy porcelain finish
• Top mount or undercounter installation
• Silicone sealant supplied
• Available CHO, 3 faucet hole configuration, or
less fittings deck
• Customized hole punchings available
(see page G57)
Top Mount/Undercounter:
❏
7182.001 Center hole only
❏
7182.803 3 hole
❏ 7182.000 No faucet holes
Undercounter Installation Order:
❏ 791003-100 Mounting Kit (consists of
cut-out templates and mounting hardware)
Nominal Dimensions with faucet hole
7182.001 and 7182.803:
419 x 381 x 216mm
(16-1/2" x 15" x 8-1/2")
Nominal Dimensions no faucet hole 7182.000:
419 x 314 x 216mm
(16-1/2" x 12-3/8" x 8-1/2")
Bowl sizes for all models:
330mm (13") wide
229mm (9") front to back
203mm (8") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
© 2008 AS America Inc.
ISLAND SINK
®
7182.001/7182.803
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
To Be Specified:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Basket Strainer: 4331.013
❏ Soap Dispenser: 4503.115, Color:
❏ Trap:
Optional Accessories:
❏ Small Wood Cutting Board: 9000.185
❏ Colander For Cutting Board: 8102.100, Color:
* See faucet section for available models
G47
CHANDLER™
ISLAND SINK
AMERICAST
7182.000
Revised 2/08
®