Rio Evolution User Manual page 22

© The Dezac Group 2012
STEP 4
4
Pull the old bulb cartridge out.
Important: Do NOT touch the bulb
glass surfaces as these may be hot.
© The Dezac Group 2012
STEP 5
5
To fit the new bulb cartridge, ensure
the connecting pins line up with the pin
holes inside the unit.
Push fully into place.
© The Dezac Group 2012
EVOLUTION
CH ANG ING T HE BU L B CA R T R I D G E
™
IPL HAIR REMOVER
STEP 6
6
Ensure the treatment head is correctly
aligned and push gently on.
The unit will automatically power on.
back ON to reset (see 'Error Codes' section).
STEP 7
7
Press and hold the (-) and (+) buttons
together. The bulb indicator light and
power level 5 light will go out. The
enable button will flash blue indicating
the unit is ready for further treatments.
Note: The unit will not power on if the
bulb is fitted incorrectly or missing.
20
Ensure there are no gaps. If
incorrectly fitted, the unit will
enter sleep mode. Correctly fit
the treatment head, turn the unit
OFF, wait 5 seconds and turn