Rio Evolution User Manual page 16

© The Dezac Group 2012
STEP 5
5
Press the enable button once.
The enable button will stop flashing.
Note: Each time the power setting is
adjusted, you will need to press the
enable button to continue.
The indicator light will illuminate orange.
© The Dezac Group 2012
STEP 6
6
Place the unit over the area you wish
to treat and apply pressure to ensure
good contact with the skin.
When all 4 skin sensors have good
contact with the skin, the indicator
light will illuminate blue to indicate a
© The Dezac Group 2012
treatment can take place.
EVOLUTION
INS T R UC T IO NS F O R U S E
™
IPL HAIR REMOVER
Important: Ensure all 4 skin sensors
are in contact with the skin, otherwise
1
a treatment flash will not be possible.
4 2
As you treat an area you may need to
3
apply more pressure in certain places or
adjust the angle of the treatment head
on the skin to allow for the change in
body shape.
STEP 7
7
Press the treatment button to initiate
the treatment flash. It is quite normal to
feel a warming of the treated area.
The unit will self-check after each flash.
During this time the power level lights
will illuminate up and down.
14