Honeywell Dolphin 9500 Quick Start Manual page 8

4. Enter the user name <handheld> and default login password
<handheld> to log into Net Base configuration utility. The Net Base
menu program displays.
***********************************************
* Welcome to the Honeywell Net Base
***********************************************
SD00032Login: handheld
Password: ********
1) View System Configuration
2) View Current Values
3) Express Setup
4) Advanced Setup
5) System Statistics
6) System Diagnostics
7) Help
x) Exit
Enter choice: 2
5. Enter choice 2 (View Current Values) to display IP addresses.
6. Record the IP address for the Ethernet port.
7. Open the web browser on your workstation and enter the IP
address for the Net Base you wrote down in Step 6.
8. Press ENTER and the online configuration utility displays on your
workstation.
Configuring the Net Base with a Static IP Address
1. Connect the serial cable to the Serial DB-9 Connector on the back
of the Net Base and a COM port on the host computer. Do NOT
connect to the network at this time.
2. On the workstation, start Hyperterminal. Use these settings:
115200 bps, 8,N,1.
3. Wait until login prompt displays on Hyperterminal.
6
*