Sync Control Setup; Exit Setup Menu - Honeywell HCD484L User Manual

Sync Control Setup

To synchronize the vertical interval sync pulse of your
camera with other equipment to reduce the effect of picture
roll on the monitor.
Figure 14
Menu Item
INTERNAL
LINELOCK
AUTO
RETURN

Exit Setup Menu

To exit the SETUP menu.
Figure 15
Menu Item
SAVE AND EXIT
EXIT
RETURN
Rev 2
Sync Control Setup
<SYNC. CONTROL>
SYNC MODE:
RETURN
Description
When line lock is not required.
Adjust the proper phase:
V.PH: 000 to 300 (factory default is 0)
Note
Line lock is not available in 12 VDC power.
Camera automatically detects synchronization.
Press MENU to return to the SETUP MENU.
Exit Menu
<EXIT MENU>
SAVE AND EXIT
EXIT
RETURN
Description
Press MENU to save your changes and exit.
Press MENU to quit without saving your
changes.
Press MENU to return to the SETUP MENU.
16
LINELOCK
V.PH 000
STEP=10
G-113079-002
02/07