Display Images - Canon IXUS 265 HS Getting Started

z z On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
3
Turn the TV on and switch to
video input.
z z Switch the TV input to the video input you
connected the cable to in step 2.
4
Turn the camera on.
z z Press the <1> button to turn the camera
on.
z z Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
z z When finished, turn off the camera and
TV before disconnecting the cable.
• Camera operating sounds are not played while the camera is connected to an
HDTV.
Controlling the Camera with a TV Remote
Connecting the camera to an HDMI CEC-compatible TV enables playback
(including slideshow playback) using the TV remote control.
Depending on the TV, you may need to adjust some TV settings. For
details, refer to the TV manual.
1
Configure the setting.
z z Press the <n> button, choose
[Ctrl via HDMI] on the [3] tab, and then
choose [Enable]
2
Connect the camera to the TV.
z z Follow steps 1 – 2 in "Playback on a
High-Definition TV"
the camera to the TV.
3

Display images.

z z Turn on the TV. On the camera, press the
<1> button.
z z Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
Before Use Before Use
Still Images Movies
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
(= 22).
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
(= 121) to connect
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
122