Registering Image Sync To The <{> Button; Clearing Registered Destinations - Canon IXUS 265 HS Getting Started

Registering Image Sync to the <{> Button
By registering Image Sync to the <{> button, you can simply press the
<{> button to send any unsent images on the memory card to a computer
via CANON iMAGE GATEWAY. For details on Image Sync, see "Sending
Images Automatically (Image Sync)"
1
Prepare the camera.
z z
Register [
z z Install the software on the destination
computer, and configure the camera
settings
2
Press the <{> button.
3
Choose the destination.
z z Press the <q><r> buttons to choose
[
z z
The camera will automatically reconnect
to any previous access points and send
the images
z z From now on, you can simply press the
<{> button to send images.
(= 106).
] as the destination (= 87).
(= 91).
], and then press the <m> button.
(= 106).

Clearing Registered Destinations

z z Press the <n> button, and then
choose [Mobile Device Connect Button]
on the [3] tab
z z Press the <q><r> buttons to choose
[OK], and then press the <m> button.
z z After a confirmation message is
displayed, press the <m> button.
• Registered destinations are also cleared when you reset Wi-Fi settings
(= 110).
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
(= 22).
Camera Basics Camera Basics
Auto Mode / Hybrid Auto Mode / Hybrid
Auto Mode Auto Mode
Other Shooting Other Shooting
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Wi-Fi Functions Wi-Fi Functions
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
105