6
Getting connected
To connect to the internet with this phone, you can use GPRS/EDGE/3G
networks or Wi-Fi, whichever is most convenient.
6.1
Connecting to the Internet
6.1.1
GPRS/EDGE/3G
The first time you turn on your phone with SIM card inserted, it will
automatically configure network service: GPRS, EDGE or 3G.
To check the network connection you are using, touch the Application
tab from the Home screen, then touch Settings\Wireless & networks\
Mobile networks\Network settings\Network operators or Access
Point Names.
To create a new access point
A new GPRS/EDGE/3G network connection can be added to your phone
with the following steps:
•
Touch the Application tab from the Home screen.
•
Touch
Settings\Wireless & networks\Mobile networks\Network
settings\Access Point Names.
•
Then press
Menu key and touch New APN.
•
Enter the required APN information.
•
When finished, press
Menu key and touch Save.
..............
67
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
•
Touch the Application tab from the Home screen.
•
Touch
Settings\Wireless & networks\Mobile networks\Data
roaming.
•
Mark/Unmark the checkbox to activate or deactivate data roaming.
•
When Data roaming is deactivated, you can still perform data exchange
with a Wi-Fi connection (refer to section 6.1.2 Wi-Fi).
To limit your data connection to 2G networks only
To save battery and extend battery life, you can set to activate 2G
networks (GPRS or EDGE) only.
•
Touch the Application tab from the Home screen.
•
Touch
Settings\Wireless & networks\Mobile networks\Network
settings\Network mode.
•
Touch
2G only in the dailog that opens.
68