Table of Contents
Advertisement
Installing or removing the battery
•
Insert and click the battery into place, then close the phone cover.
•
Unclip the cover, then remove the battery.
Installing and removing the microSD card
Insert the microSD card into the slot with the golden contact facing
downwards. To remove the card, press and slide it out.
To avoid data loss and SD card damage, before removing the SD
card, please ensure that the SD card is unmounted (Settings\SD
card&Phone storage\Unmount SD card).
15
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
•
The LED notification light will be lit up during battery charging.
•
Be careful not to force the plug into the socket.
•
Make sure the battery is correctly inserted before connecting the
charger.
•
The mains socket must be near to the phone and easily accessible (avoid
electric extension cables).
•
When using your telephone for the first time, charge the battery fully
(approximately 4 hours).
•
You are advised to fully charge the battery. Charging is complete when
the animation stops (
).
To reduce power consumption and energy waste, when the battery
is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when
not in use; reduce the backlight time, etc.
Standard charger
UK charger
16
Advertisement
Table of Contents
