Table of Contents
Advertisement
FUNCTIONAL OVERVIEW
Remote Controller
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
DV-RMPF7E
Loading the Batteries
1. Open the battery compartment
cover.
33
32
2. Insert two AA batteries, with
each one oriented correctly.
31
30
29
3. Close the cover.
28
Cautions On Batteries
Use "AA" (R6P) batteries in this remote control unit.
27
Replace the batteries with new ones approximately
26
once a year, though this depends on the frequency
25
with which the remote control unit is used.
If the remote control unit does not operate from
24
close to the main unit, replace the batteries with
23
new ones, even if less then a year has passed.
The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
22
When inserting the batteries, be careful to do so in
21
the proper direction, following the
in the remote control unit's battery compartment.
To prevent damage or battery fluid leakage:
Do not use a new battery with an old one.
Do not use two different types of batteries such
as alkaline and manganese.
Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
Remove the batteries when not planning to use the
remote control unit for a long period of time.
If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
2-9
and
marks
Hide quick links:
Advertisement
Table of Contents
