Only For Training And Service Purposes - LG KP330 Service Manual

3. TECHNICAL BRIEF
The VGA Camera module is connected to FPCB with 20pin Board to Board connector
(AXK720147G). Its interface is dedicated camera interface port in MSM6260. The
camera port supply 24.576MHz master clock to camera module and receive 24.576MHz
pixel clock (30fps), vertical sync signal, horizontal sync signal, reset signal and 8bits
data from camera module. The camera module is controlled by I2C port from MSM6260.
No Name
1 CAM_PWDN
2 CAM_MCLK
3 GND
4 CAM_PCLK
5 CAM_DATA(0)
6 CAM_DATA(1)
7 CAM_DATA(2)
8 CAM_DATA(3)
9 CAM_DATA(4)
10 CAM_DATA(5)
11 CAM_DATA(6)
12 CAM_DATA(7)
13 CAM_VSYNC
14 CAM_HSYNC
15 GND
16 I2C_SDA
17 I2C_SCL
18 CAM_RESET_N
19 VREG_MSMP_1.8V
20 VREG_CAM_2.8V
Table. Interface between VGA Camera Module and FPCB (in camera module)
LGE Internal Use Only
KP330 Operational Description
[ Pin Description ]
Port Note
i Camera power down
I Master Clock(24M)
GND GND
O Clock for Camera Data Out(13M)
O Data
O Data
O Data
O Data
O Data
O Data
O Data
O Data
O Vertical Synch
O Horizontal Sync
GND GND
I I2C Clock
I I2C Clock
I Camera reset signal
I Camera I/O Power
I Camera I/O Power
- 72 - Copyright © 2008 LG Electronics. Inc. All right reserved.

Only for training and service purposes