Lan Setup - NETGEAR JNR1010v2 N150 User Manual

The following table describes common MTU sizes and applications.
Table 3. Common MTU sizes
MTU Application
1500 The largest Ethernet packet size. This value is the typical setting for non-PPPoE,
non-VPN connections, and is the default value for NETGEAR routers, adapters, and
switches.
1492 Used in PPPoE environments.
1472 Maximum size to use for pinging. (Larger packets are fragmented.)
1468 Used in some DHCP environments.
1460 Usable by AOL if you do not have large email attachments, for example.
1436 Used in PPTP environments or with VPN.
1400 Maximum size for AOL DSL.
576 Typical value to connect to dial-up ISPs.
To change the MTU size:

1. Log in to the router.
For more information, see
2. Select ADVANCED > Setup > WAN Setup.
The WAN Setup screen displays.
3. In the MTU Size field, enter a new size from 64 through 1500.
4. Click the Apply button.
Your changes are saved.

LAN Setup

You can configure LAN IP services such as Dynamic Host Configuration Protocol (DHCP)
and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to
function as a DHCP server. The router's default LAN IP configuration includes the following
settings:
• LAN IP address. 192.168.1.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and are suitable for most applications. If your network requires the use of a different IP
addressing scheme, change the settings in the LAN Setup screen.
JNR1010v2 N150 Wireless Router
Log In to Your Router After Installation
genie ADVANCED Home
46
on page 18.