Advanced Wireless Settings
You can configure advanced settings for your wireless network. You can also set up a
schedule to turn off your wireless network, configure the WPS settings, and set up an access
list for wireless clients.
Advanced Settings for Your Wireless Network
NETGEAR recommends that you use caution when changing these settings.
To change advanced settings for your wireless network:
1.
Log in to the router.
For more information, see
2.
Select ADVANCED > Advanced Setup > Advanced Wireless Settings.
The following screen displays:
3.
Select the settings you want to change.
IMPORTANT:
The Fragmentation Length, CTS/RTS Threshold, and Preamble
Mode options are reserved for wireless testing and advanced
configuration only. Do not change these settings.
JNR1010v2 N150 Wireless Router
Log In to Your Router After Installation
Advanced Settings
58
on page 18.