Figure 3 Check Input Signal - Honeywell HMLCD17e2 User Manual

Connecting the Monitor
12
6. VIDEO 2(AV2) OUT
Composite signal Output for AV2
7. VIDEO 2(AV2) IN
Composite signal Input for AV2
8. VIDEO 1(AV1) OUT
Video looping Output for AV1
9. VIDEO 1(AV1) IN
Composite signal Input for AV1
10. D-SUB IN
PC Signal Input
11. DC 12Volt IN
Note: If there is no connection than the following Check Input Signal message is
displayed for 3 seconds:
Figure 3 Check input Signal