Service Program Mode Tables; Sp1-Xxx: Feed - Ricoh A-C2 Service Manual

SERVICE PROGRAM MODE

5.1.2 SERVICE PROGRAM MODE TABLES

Service Table Key
Notation
[range / default / step]
italics
*
1111
B003/B006
B004/B007
DFU
Japan only
(S)
(L)

SP1-xxx: Feed

SP1 Mode Number
1001* Leading Edge Registration
1002* Side-to-Side Registration
1 Tray1
2 Tray2
3 Tray3
4 Tray4
5 Duplex Tray
6 By-pass Tray
7 LCT (if present)
1003* Registration Buckle Adjustment
1 Paper Feed Trays/LCT
2 Duplex Tray
3 By-pass Tray
4 Tray1 Feed
1007 By-pass Feed Paper Size
Display
What it means
Example: [-9 ~ +9 / +3.0 / 0.1 mm step]. The setting can be adjusted in
the range 9, value reset to +3.0 after an NVRAM reset, and the value
can be changed in 0.1 mm steps with each key press.
Comments added for reference.
Value stored in NVRAM. After a RAM reset, this default value (factory
setting) is restored.
An SP number set in bold-italic denotes a "Special Service Program"
mode setting that appears only after entering the SP mode by pressing
! and Copy SP together. (☛ 5-1)
Denotes the 35 cpm model.
Denotes the 45 cpm model.
Denotes "Design or Factory Use". Do not change this value.
The feature or item is for Japan only. Do not change this value.
Sideways feed direction
Lengthwise feed direction
Function and [Setting]
Adjusts the printing leading edge registration using
the trimming area pattern (SP2-902-3, No.11).
[+9 ~ –9 / 3.0 / 0.1 mm]
Use ! to toggle between
value.
Specification: 3 2 mm
Adjusts the printing side-to-side registration from
the 3rd paper feed station using the trimming area
pattern (SP2-902-3, No.11).
Use the ! key to toggle between + and – before
entering the value.
Specification: 2 1.5 mm
[–9~ +9/ +3.0 mm / 0.1 mm step]
[–9~ +9/ +2.0 mm / 0.1 mm/step]
Tray3, Tray4 for Paper Feed Unit.
[–9~ +9/ +0.0 mm / 0.1 mm/step]
[–9~ +9/ +3.0 mm / 0.1 mm/step]
[–9~ +9/ +1.5 mm / 0.1 mm/step]
Adjusts the relay clutch timing at registration. Relay
clutch timing determines the amount of paper
buckle at registration. (A "+" setting causes more
buckling.)
[–9~+9/+0.0 mm (1 mm for 1st Tray Feed)/0.1 mm
step]
Displays the paper width sensor data for the by-
pass feed table.
5-4
19 January, 2001
before entering the