Services - Linksys NMH Series User Manual

Chapter 7

Services

Configure the Remote Access, Windows File Sharing,
Media Server, iTunes Server, and FTP Server settings.
Services
Remote Access
Configure this feature to enable access of the Media
Hub over the Internet. The status of the remote access
feature and the Remote Device Name (if configured) are
displayed.
NOTE:
Linksys offers Remote Access service
through www.ciscomediahub.com.
Configure Click this option to configure this feature.
Remote Access
Enable Remote Access to the Media Hub
•
remote access of the Media Hub, select this option. (It
is disabled by default.)
If you enable the remote access feature, then configure
the Remote Device Name:
Remote Device Name
•
Name you want to assign to the Media Hub. If the
name is already taken, you will be prompted to enter
a different name.
Media Hub
†
To allow
Enter the Remote Device
Advanced Configuration
NOTE: You can change the Remote Device
Name at any time; however, the Media Hub only
supports a single Remote Device Name. If you
save a new Remote Device Name, then you give
up the old one.
Click Submit to save your changes, or click Cancel to
cancel your changes.
Remote Access Instructions
1. Open the web browser of the computer you are
using.
2. In the Address field,
http://www.ciscomediahub.com
Press Enter.
3. Enter the Remote Device Name of the Media Hub, and
then click Go.
NOTE: Depending on the web browser you
are using, certificate or security warning
screens may appear. To continue with the
login process for remote access, accept the
warnings. For more information, refer to
Appendix A: Troubleshooting, page 41.
Enter Remote Device Name
enter this address:
39