Table of Contents
Advertisement
Chapter 5
Chapter 5: Use of the
LCD Menu
This chapter describes functions of the LCD menu, which
is only featured on the Media Hub with LCD (NMH400
Series). Use the LCD menu to do the following:
initiate backup jobs for computer(s) running the
•
backup tool (Refer to NTI Shadow, page 29 for more
information.)
back up or import files from your USB storage device
•
or memory card to the Media Hub
display status information for the Media Hub
•
NOTE:
For the IP address of the Media Hub, go
to Status > Network.
configure LCD screen settings
•
power off the Media Hub
•
Media Hub with LCD (NMH400 Series)
How to Navigate the LCD Menu
Use the navigation pad to navigate the LCD menus. Press
the up or down arrow to move up or down the menu
choices. Press the right arrow to move to a lower menu
level. Press the left arrow to move to a higher menu level.
The OK button has three functions:
To select a menu choice, press the
•
Media Hub
OK button.
Use of the LCD Menu
While the Media Hub is booting up, press the
•
button to boot backup firmware from the hard drive.
To display the main menu,
•
How to Access the LCD Menu
After the Media Hub is powered on and boots up, the
main menu is displayed and offers these options:
Backup
Select this option to initiate computer or device
backup jobs.
Status
Select this option to view space, usage, or network
information.
Settings
Select this option to configure the screensaver
or backlight settings. You can also upgrade the firmware
of the Media Hub.
Power Off
Select this option to power off the Media
Hub.
Main Menu
If the screensaver with the Friendly Name is displayed,
press the OK button to activate the LCD menu.
Screensaver
Backup
The Backup screen allows you to copy files from your
computers or devices to the Media Hub.
Backup
OK
press the OK button.
25
Advertisement
Table of Contents
