Beam IsatDock MARINE User Manual page 23

10) Water Resistant IP54 Rating
The IsatDock MARINE has an ingress Protection
rating of 54. When installing the IsatDock it is
important that the following steps are taken to
ensure the protection is maintained.
• The MARINE cover is closed over the
IsatPhone Pro. Ensure the latch is engaged
and clicked in place.
O
P
• Both security bolts & plugs are fitted (see
section 2a Wall Mounting Orientation). The
security bolts pass through the docking
station and need to be in place to create a
seal against the o-rings at the rear of the
Dock. The plugs must also be fitted on the
front side of the Dock under the Mounting
Cup and IsatPhone Pro.
IsatDock MARINE - Installation & User Manual
• Rear Cover Screwed in Place. The rear cover
of the MARINE dock must be screwed down
with at least the four screws indicated below
to ensure the waterproof seal is achieved
(indicated by a & b). Care should be taken
placing the cables in the respective cable
guides as any damage to the sealing foam will
compromise the water resistant foam seal.
A
a
b
B
C
23