Factory Data; How To Access Service Mode - Samsung LE15S51BP Service Manual

3 Alignments and Adjustments

3-2 How to Access Service Mode

3-2-1 Entering Factory Mode
1. To enter "Service Mode" Press the remote -control keys in this sequence :
- If you do not have Factory remote - control
- If you have Factory remote - control

3-3 Factory Data

Service
PC Auto Color
Video Auto Color
Reset
DLC/MWE Part
SFR PART
Sub Adjust
UOC Adjust
Option
Checksum
Panel Information
Bus Stop : OFF
2005/06/23
T-pls25nus-0906
Service
PC Auto Color
Video Auto Color
Service Function
Reset
Adjust
DLC/MWE Part
PC Auto Color
SFR PART
Option
Sub Adjust
Checksum
UOC Adjust
Panel Information
Option
Reset
Checksum
Bus Stop
Panel Information
Bus Stop : OFF
2005/04/20
TM-BRHMS20WW-0714
2005/04/20
TM-BRHMS20WW-0714
3-2
-. OSD which the basic adjustment is added.
PC Auto Color
¢" ¢"
Video Auto Color
¢" ¢"
Reset
¢" ¢"
DLC/MWE Part
¢" ¢"
¢" ¢"
SFR PART
¢" ¢"
Sub Adjust
¢" ¢"
UOC Adjust
¢" ¢"
¢" ¢"
Option
¢" ¢"
Checksum
¢" ¢"
Panel Information
Bus Stop
*. 2005/06/23: MCU firmware date.
*. T-PLUS25NUS-0906: MCU firmware version information
(this information must be appended due to a compatibility problem report.)
1) Reset: Factory reset
2) Bus Stop: The communication Line ON / OFF
Move to the ( -) / (+) key, select the 'Enter' key.
¢" ¢"
¢" ¢"
3) Auto adjustment
¢" ¢"
¢" ¢" ¢" ¢"
¢" ¢" ¢" ¢"
¢" ¢" ¢" ¢" 4) PC Auto Color/ Video Auto Color :in case that color
¢" ¢" ¢" ¢"
¢" ¢" ¢" ¢"
¢" ¢" ¢" ¢"
¢" ¢"
¢" ¢"
5) Checksum: MCU firmware checksum information
: OFF
of all screen is wrong, excute the PC Auto color at
16 gray pattern(refer to attach left 16gray pattern)
(this information must be appended due to a compatibility problem report.)