Page 1
ELECTRONICS Owner’s Instructions BN68-00816C-00 LCD TV LE15S51B LE20S51B Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS...
Page 2
Owner’s Instructions Register your product at www.samsung.com/global/register...
Precautions When Displaying a Still Image Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces.
Page 4
Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain varied and as a result the borders may leave traces. Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the...
Plug & Play When the set is initially powered ON, you are automatically presented with a series of basic customer settings. The following settings are available.
Page 18
Plug & Play If you want to reset this feature...
Selecting TV Mode or an Input Source You can choose TV mode or change to an input source connected to the TV set. Use this button to choose an input source that you would like to watch.
Editing an Input Source Name Entering the names of the input source devices connected to the input ports on the TV set allows you to find and choose an input source that you would like to watch in a quick and convenient manner.
Choosing Your Language When you start using your set for the first time, you must select the language which will be used for displaying menus and indicators.
Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
Storing Channels Manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found The programme number of each stored channel which you wish to identify...
Editing the Channels You can exclude any channels of your choice from the channels you have scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
Sorting the Stored Channels You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. Assign easily remembered numbers to the channels that you watch most often.
Giving Channels Names If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required.
Picture Mode You can select the type of picture which best corresponds to your viewing requirements. Adjusting the Custom Picture Your set has several settings which allow you to control picture quality.
Page 47
Adjusting the Screen Background Colour You can change the screen background colour according to your preference.
Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of your set and contact your local dealer.
Troubleshooting: Before Contacting Service Personnel Power Saver This set has a built-in power management system called PowerSaver. This system saves energy by switching your set into a low-power mode when it has not been used for a certain period of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”.
Installing the Wall Mount Kit Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.
Page 57
Installing the Wall Mount Kit Note : Picture (2) shows the angle adjustment section while LCD TV is being converted from stand-based one to wall-mounted one or vice versa. - Click" sound indicates section change from 1 to 2 or 3 to 2(1 - >2, 3 - >2).