Chapter 3 Login To Web Utility - Tenda N60 User Manual

Chapter 3 Login to Web Utility

The device's default IP is 192.168.0.1. You can change it to accommodate your own
needs. Here in this manual, we use the default IP.
Connect you PC to the router and config your PC's TCP/IP settings following
instructions in appendix 1 hereto. And then do as follows to run a Ping command
to test connectivity between your PC and the router.
1. Select "Start"—"Run" and enter "cmd". Then press "Enter".
Enter "ping 192.168.0.1" and press "Enter". If you see the following screen, it
means the router is reachable on your PC. If you don't get the following screen,
verify router's power supply, Ethernet cable connections and your PC's TCP/IP
settings.
Concurrent Dual Band Wireless N600 Gigabit Router
9