L2Tp - Tenda N60 User Manual

Internet connection Type: Displays a list of available Internet connection
types.
PPTP Server IP: Enter the IP address of a PPTP server.
Username/Password: Enter Username/Password defined by the PPTP server.
Address mode: Select "Dynamic" if you don't get any IP info from the PPTP
server side, otherwise select "Static".
IP Address: Enter the IP address provided by your ISP. Inquire your local ISP if
you are not clear.
Subnet mask: Enter the subnet mask provided by your ISP.
Default Gateway: Enter the gateway provided by your ISP. Inquire your local
ISP if you are not clear.
DNS Server: Enter the necessary DNS address provided by your ISP.
Secondary DNS Server: Enter the other DNS address if your ISP provides you
with 2 such addresses, and it is optional.
MTU: Maximum Transmission Unit. The default value is 1460.
5)L2TP: Allows you to connect your router to a L2TP server.
For example：A corporate branch and headquarter can use this connection type to
implement mutual and secure access to each other's resources.
Concurrent Dual Band Wireless N600 Gigabit Router
17