Honda EW170 Owner's Manual page 35

Generator/welder
Hide thumbs Also See for EW170:
Table of Contents

Advertisement

Is there enough bil in the crankcase?
l
The oil alert system prevents the engine from being started if the
level of oil in the crankcase falls below prescribed level:
Is the spark plug wet or fouled?
0 Clean the spark plug.
0 Check the plug gap and adjust.
Is there spark at the spark plug?
1) Remove the spark plug cap. Clean any dirt from around the spark
plug base, and remove the spark plug.
2) Install the spark plug in the plug cap.
3) Turn the engine switch on. Grounding the side electrode to the
stay, pull the recoil starter to see ,if sparks jump across the gap.
STARTER
,'
-A
GRIP
GROUNDING
STAY
ENGINE
0 If there are no sparks, replace the plug.
l
If a new plug produces no sparks or if there are sparks and the
engine still does not start, take the generator to the dealer.
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents