Welding - Honda EW170 Owner's Manual

l
Welding
m Welding is potentially a very hazardous activity. It should only
be attempted by a trained welder with a thorough knowledge of proper
welding techniques and safety procedures. Be sure to read and follow the
safety rules on pages 3 and 4 of this manual.
1. Put the Engine Switch in the OFF position. Turn the AC circuit breaker.
off and remove any plugs from the AC receptacles.
CAUTION: Voltage is present at the welding terminals whenever the
engine-is running regardless of the position of the AC/DC (WELD) selector.
16