Check The Fuel Level - Honda EW170 Owner's Manual

Generator/welder
Hide thumbs Also See for EW170:
Table of Contents

Advertisement

2.
Check the fuel level.
Use any regular grade automotive gasoline (unleaded gasoline is preferred)
with a pump octane rating of 86 or higher.
Never use an oil/gasoline mixture or dirty gasoline. Avoid getting dirt, dust
or water in the fuel tank.
CAUTION:
Gasoline substitutes
are not recommended;
they may be harm-
ful to fuel system components.
0 Gasoline
is extremely
flammable.and
explosive
under certain conditions.
Refuel in a well ventilated
area with the engine stopped.
l
Do not smoke or allow flames or sparks in the area where the welder is
refueled or where gasoline is stored.
l
Do not overfill
the tank and make sure the filler
cap is securely closed
after refueling.
l
Be careful
not to spill fuel when refueling.
Fuel vapor or spilled fuel may
ignite.
If any fuel is spilled,
make sure the area is dry before starting the
engine.
FUEL
TANK
CAP
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents