Arctic Cat Y-6 2008 Manual page 57

FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
Installing
Engine/Transmission
1. Install the engine mounting bracket at the front
of the engine and the two mounting cap screws
at the rear. Tighten to specifications.
2. Install the spark plug cap onto the spark plug;
then connect the starter motor wire and AC gen-
erator wire connectors on the left side of the
frame.
www.mymowerparts.com
Back
3-34
DSC02030
DSC02028
DSC02029
Back to TOC
3. Install the drive chain; then connect with the
master link and plate. Install the clip with the
open end directed opposite of chain rotation.
4. Install the tailpipe at the hanging mount at the
rear and at the flange. Tighten the rear bolt to
specifications. Use a new gasket for the flange
contact.
5. Install the intake manifold and the insulator.
Tighten the two flange nuts to specifications.
Back to Section TOC
DSC02033
DSC02024
DSC02023
Next