Bosch DinionXF LTC 0495/11 Specifications

CCTV | LTC 0495 Series DinionXF Day Night Cameras
LTC 0495 Series DinionXF Day Night
Cameras
The LTC 0495 High Performance 1/3-inch Digital CCD Day/
Night Camera ensures the highest image quality possible at
any time. Depending on the available light the camera will
automatically switch from color to monochrome.
A unique combination of 15-bit digital video processing that
enhances sensitivity and XF-Dynamic which extends the
dynamic range provides a sharper, more detailed image
with outstanding accuracy in color reproduction.
All Dinion cameras are supplied ready to operate. Simply
attach and focus the lens, then connect power. No tools are
required for back focus and power connection. For
especially challenging situations where fine tuning or
special settings are required, the camera parameters can be
individually set using the control buttons on the side of the
camera and On-screen Display (OSD). The camera
automatically detects the lens type. The Lens Wizard
ensures accurate back-focusing for perfectly sharp pictures
at all times.
Functions
XF-Dynamic
The highly accurate 15-bit digital signal is automatically
processed to optimally capture the detail in both the high
and low light areas of the scene simultaneously, maximizing
the information visible in the picture.
▶ 15-bit DSP Technology
▶ High sensitivity
▶ Mechanically switching IR filter for IR sensitivity at
night
▶ XF-Dynamic for unsurpassed wide dynamic range
▶ Bilinx Communication for remote set-up and control
▶ Default Shutter eliminates motion blurring
▶ Four area video motion detection
▶ 540 TVL resolution
Bilinx Technology
Bilinx is a bidirectional communication capability
embedded in the video signal of all Bosch Dinion cameras.
Technicians can check status, change camera settings and
even update firmware from virtually anywhere along the
video cable. Bilinx reduces service and installation time,
provides for more accurate set-up and adjustment, and
improves overall performance. In addition, Bilinx uses the
standard video cable to transmit alarm and status
messages, providing superior performance without
additional installation steps.
Video Motion Detection
The built-in video motion detector allows you to select up
to four fully programmable areas with individual thresholds.
The global scene change detector minimizes false alarms
caused by sudden lighting condition changes, such as
switching on or off the indoor or security lighting. When
motion is detected alarms may be displayed in the video
signal while the output relay can be closed in addition to
alarm message transmission on Bilinx.
Auto Black
The automatic black level feature enhances contrast by
compensating for reduced contrast (i.e. glare, fog, mist).
www.boschsecurity.com