Check Before Starting Repairs - LG LH-C6230P Service Manual

MAINTENANCE/INSPECTION PROCEDURE

1. Check before starting repairs

The following faults can be remedied by cleaning and oil-
ing. Check the needed lubrication and the conditions of
cleanliness in the unit.
Check with the customer to find out how often the unit is
used, and then determine that the unit is ready for inspec-
tion and maintenance. Check the following parts.
Phenomenon Inspection
Color beats Dirt on Full-Erase Head
Poor S/N, no color Dirt on Video Head
Vertical or Dirt on Video Head
Horizontal jitter Dirt on tape transport system
Low volume,
Dirt on Audio/Control Head
Sound distorted
Tape does not run.
Dirt on Pinch Roller
Tape is slack
In Review and
Clutch Assembly D35
Unloading (off mode),
torque reduced
the tape is rolled up
loosely.
Cleaning Drum and
transport system
NOTE
If locations marked with o do not operate normally after
cleaning, check for wear and replace.
See the EXPLODED VIEWS at the end of this manual as
well as the above illustrations and see the Greasing (Page
4-21, 22) for the sections to be lubricated and greased.
* No. (1)~(12) Indicates the Tape Path to be traveled from Supply Reel to Take-up Reel.
(3) F/E Head
(5) Drum Assembly
(Video Head)
(4) Base
Assembly P2
(2) Tension Post
(1) Supply Reel
Replace-
ment
F/E Head
o
o
Video Head
o
A/C Head
o
Pinch Roller
o
Belt Capston
Clutch
o
Assembly D35
Fig. C-9-3
Fig. C-9-3 Tape Transport System
- 4-19 -
Fig. C-9-1 Top View
Fig. C-9-2 Bottom View
(6) Base Assembly P3
(7) A/C Head
(8) P4 Post
(10) Pinch Roller
(11) Take-up Guide Post
(9) Capstan Shaft
(12) Take-up Reel