Replacing The Antenna Cables - Acer eMachines E720 Series Service Manual

Acer emachines e720/e520 series service guide
Table of Contents

Advertisement

4. Turn the computer over and replace the two securing screws on the bottom of the chassis.

Replacing the Antenna Cables

Ensure that the three Antenna cables pass through the Mainboard and are accessible from the underside of
lower cover.
1. Insert the Antenna Cables through the Upper
Cover. Make sure they are accessible from the
underside.
3. Secure the cables in place as shown.
Chapter 3
2. Pull the cables through.
4. Place the cabling in the wiring conduit as shown.
129

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emachines e520 series

Table of Contents