Main - Acer eMachines E720 Series Service Manual

Main

The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
Information
System Time
System Date
Total Memory
System Memory
Quick Boot
Network Boot
D2D Recovery
SATA Mode
F1 Help
ESC Exit
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
Total Memory
System Memory
Quick Boot
Network Boot
D2D Recovery
SATA Mode
Chapter 2
InsydeH20 Setup Utility
Main Security Power
[13:04:04]
[10/10/2008]
2047 MB
[64MB]
[Enabled]
[Enabled]
[Enabled]
[ACHI]
↑↓
Select Item
←→
Select Menu
Description
Sets the system time. The hours are displayed with 24-
hour format.
Sets the system date.
This field reports the total memory size. Memory size is
fixed to 2047 MB.
This field reports the System Memory size.
Enables the boot sequence to skip some processes to
boot up more quickly.
Enables, disables the system boot from LAN (remote
server).
Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Control the mode in which the SATA controller should
operate.
Boot Exit
F5/F6 Change Values
Enter Select Submenu
Item Specific Help
This is the help for the
hour field. Valid range
is from 0 to 23.
INCREASE/REDUCE : F5/F6
F9 Setup Default
F10 Save and Exit
Format/Option
Format: HH:MM:SS
(hour:minute:second)
Format MM/DD/YYYY
(month/day/year)
N/A
Option: 32, 64, 128, 246,
512, or 1024.
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: Enabled or
Disabled
Option: ACHI or IDE
27