Sony Cyber-shot DSC-S60 Service Manual page 7

1-5. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)
Note: 1 When replacing the SY-126 board, erase the data in internal memory of the board before replacement.
Note: 2 When replacing the SY-126 board or the IC301 on the SY-126 board, execute formatting and initialize the internal memory after
replacement.
Method for Copying the Data in Internal Memory
Copy
Copies all images in the internal memory to a "Memory Stick".
OK
Cancel
1 Insert a "Memory Stick" having 32 MB or larger capacity.
2 Select [OK] with v on the control button, then press z.
The message "All data in internal memory will be copied Ready?" appears.
3 Select [OK] with v, then press z.
Copying starts.
Copying
102_COPY
• Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files
using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly
corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the "Memory Stick" after copying, then execute the [Format] command in
Internal Memory Tool.
• You cannot select a folder copied on a "Memory Stick".
• The setting of
Method for Formatting the Internal Memory
Format
Formats the internal memory.
• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
OK
Cancel
1 Select [OK] with v on the control button, then press z.
The message "All data in internal memory will be erased Ready?" appears.
2 Select [OK] with v, then press z.
The format is complete.
DSC-S60/S80/S90/ST80
See the following procedure.
Cancels the copying.
(Print order) marks is not copied even when you copy data.
See the following procedure.
Cancels the formatting.
1-3