Video Quality; Record Schedule - Night Owl Tiger-4500 Instruction Manual

Note: The higher the frame rate, the smoother the recorded images will be, but more disc space will
be required. If leaving for an extended period of time (over 1 month), please lower the frame rate per
channel, use a low frame rate and set to motion activated to prolong the recording time of your Hard
Disk Drive.

4.6 Video Quality

MAIN MENU
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY

RECORD SCHEDULE

SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
LANGUAGE
RESET MENU
( )MOVE (SEL)SELECT (MENU)EXIT
Note: The higher the video quality, the smoother the recorded images will be, but more disc space
will be required. If leaving for an extended period of time (over 1 month), please lower the frame rate
( )MOVE (SEL)SELECT (MENU)EXIT
per channel, use low video quality and set to motion activated to prolong the recording time of your
Hard Disk Drive.
4.7 Record Schedule
RECORD SCHEDULE
AM PM
0... 3... 6... 9... 0... 3.... 6... 9...
( )MOVE (SEL)SELECT (MENU) EXIT
Note: In order to activate the record schedule please press the [ REC] button to start the recording
schedule. When the [ REC] button is pressed you will see the text "S-REC" in the bottom left portion
of the screen. This indicates that the DVR will begin recording based upon the user's record
schedule above. If the [ REC] button is not pressed the DVR will NOT record any data.
Note: By default the DVR is set to Motion Detection recording for all times.
HIGH
ENGLISH
NO-RECORD
NORMAL-RECORD
SENSOR -RECORD
There are 4 options for Video Quality Settings: Highest,
High, Normal and Low.
After you have selected the Video Quality option, press
[SEL] button to change the video quality setting.
This feature will allow the user to set the recording
method to use during the selected time.
After you have selected the Record Schedule option,
the time line indicates the 24 hours of a day based on
AM/PM (0-12). Press [▲，▼，◄◄ and ►►] button to
select a time, press [SEL] button to change the
recording mode.
1. NO-RECORD [ WHITE]: DVR will not record during
the selected time period.
2. NORMAL RECORD [ RED]: DVR will record
continuously during the selected time period.
3. SENSOR RECORD [
sensor or motion is triggered during the selected
time period.
11
User's Manual
S ]: DVR will record when a