Table of Contents
Advertisement
(5) Aperture
It is possible to set aperture correction revision of the output picture.
A setting range is 8 phases (0~7) each High frequency and Low frequency. (Factory setting：3)
・Phase up
: Picture's edge is emphasized.
(6) Gamma correction
It is possible to set gamma correction of the output picture with 17 phases(0~16). (Factory setting：5)
・Phase up
: The shading of the shade become clear.
(7) Auto Iris control
Regulate Lens Iris automatically to the brightness of the subject reasonable photography.
※ When you use Auto Iris control, please use the power supply from the AC adapter.
※ It is possible to work with DC control lens only （Recommendation lens ： DV10×8SA-SA1L FUJIFILM）
(8) Mirror mode
It is possible to turn over the output picture.
It is possible to change ON/OFF each Horizontal and Vertical.
(9) Electronic line
Because it is possible to show a monitor screen electronic lines by two vertical and horizontal, it is
convenience to align and measure the images.
You can move the line by one pixel of unit and set the following items.
・Line type
Fill / Translucent
・Line width
1 pixel / 2 pixels
・Line color
changeable
・Setting range
：0～1919
Vertical
Horizontal ：0～1079
8
D4176244A
Advertisement
Table of Contents
