Maintenance - Honda HS50 Owner's Manual

l------- --- " I
7. MAINTENANCE
The purpose of inspection and maintenance is to keep the snowblower in the best
operating condition.
Inspect or service as scheduled in the table on the next page.
~j Shut
off the engine before performing inspection and maintenance, and
remove the spark plug wire from the plug so the engine cannot be started. If the engine
must be run, make sure the area is well ventilated. The exhaust contains poisonous
carbon monoxide gas.
CAUTION :
l
Place the snowblower on a level surface before performing inspection and mainte-
nance.
l
Use only genuine HONDA parts or their equivalent. The use of replacement parts
which are not of equivalent quality may damage the snowblower.
23