Troubleshooting - Honda HS50 Owner's Manual

Honda snow blower user manual
Hide thumbs Also See for HS50:
Table of Contents

Advertisement

-..
9. TROUBLESHOOTING
-1
--
1 When the engine will not start :]
1. Is there enough fuel?
2. Is the fuel valve on?
3. Is gasoline reaching the carburetor?
To check, loosen the drain screw with the fuel valve on.
bw
If any fuel is spilled, make sure the area is dry before testing the spark
plug or starting the engine. Fuel vapor or spilled fuel may ignite.
4. Is the engine switch on?
5. Is there a spark at the spark plug?
a. Remove the spark plug cap. Clean any dirt from around the spark plug base,
then remove the spark plug.
b. Install the spark plug in the plug cap.
c. Turn the engine switch on.
d. Grounding
the side electrode
to any engine ground, crank the engine to see if
sparks jump across the gap.
e. If there are no sparks, replace the plug.
If OK, try to start the engine according to the instructions.
6. If the engine still does not start, take the snowblower to the dealer.
IWhen the auger or blower will not operate:
~-
Check the shear bolts and replace if
broken off.
Secure the shear bolts with 6 mm nuts.
Three
spare shear bolts are supplied
with the HS50 snowblower.
SHEAR BOLTS
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents