Taking Care Of Your Machine - Vax W86-DP-R Instruction Manual

Taking care of your machine

Nozzle can be removed
for easy cleaning.
Pull the nozzle release
latch upwards
Push both brush release
buttons and remove the brush
assembly cover. Brushes
can be rinsed under water to
remove debris (Max 40°C)
Remove nozzle by pulling
straight out and rinse
under running water
Carefully remove the brush
assembly cover
Remove any debris from
squeegee by wiping with
a damp cloth (Max 40�C)
To replace brushes, align
the post with square hole
on the bottom of the machine.
Push brushes firmly at
both ends until it locks into
place and replace the brush
assembly cover