Setting The Controls - PrimeAire PA7010E Use & Care Manual

Auto Dry - Will operate the dehumidi er only in
the dry mode. Auto Fan Speed is set automatically.
The desired humidity is set to 50% automatically.
Continuous - Will operate the dehumidi er
continuously. The Fan Speed can be adjusted.
The Desired Humidity cannot be adjusted. The
LED display will show the room humidity level.
Normal - Will operate the dehumidi er at
the selected fan speed and desired humidity.
If the humidity level of the room is higher than
the desired humidity setting, the compressor
will turn on. If the humidity level of the room is
lower than the desired humidity setting, the
compressor will turn o .
The deicer will turn o the compressor if
a low temperature condition exists. Pressing
the desired humidity button or the plus or
minus arrow button will not increase or
decrease the amount of moisture removed.
When the deicer senses the correct operating
temperature, the compressor will cycle back on.
5