Dehumidi Er Safety; Installation Requirements; Electrical Requirements - PrimeAire PA7010E Use & Care Manual

Table of Contents

Advertisement

DEHUMIDIFIER SAFETY
Your safety and safety of others are very important
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others. All
safety messages will follow the safety alert symbol and either the word "DANGER"
or "WARNING".
These words mean:
All safety messages will tell you what the potential hazards are, tell you how to reduce the chance of injury, and
tell you what can happen if the instructions are not followed.
Before disposing of the remote control, it is necessary to remove the batteries and dispose of them in an
environmentally responsible manner.
When you need to dispose of the unit, consult with your local recycling center for information on how to dispose
of the unit in an environmentally responsible manner.
Please recycle or dispose of the packaging material for product in an environmentally responsible manner.
WARNING: To reduce the risk of re, electrical shock ,injury or sickness when using your dehumidi er , follow these
basic precautions:
• Plug into a grounded 3 prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
DISPOSING OF THE UNIT
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Electrical Requirments
3
You can be killed or seriously injured if you do not
immediately follow instructions.
You can be killed or seriously injured if you
do not follow instructions.
• Do not use an extension cord.
• Unplug dehumidifier before servicing.
• Do not drink water collected in the water bucket
Recommended Grounding Method
This dehumidi er must be grounded. This dehumidi er is
equipped with a power supply cord having a 3-prong
grounding plug. The cord must be plugged into a mating,
grounding 3-prong outlet, grounded in accordance with
all local codes and ordinances. If a mating outlet is not
available, it is the customer's responsibility to have a
properly grounded 3-prong outlet installed by a quali ed
electrical installer.
It is the customer's responsibility:
To contact a quali ed electrical installer.
To assure that the electrical installation is
adequate and in conformance with Nation
Electrical Code, ANSI/NFPA 70-last edition,
and all local codes and ordinances.
Copies of the standards listed may be obtained from:
Nation Fire Protection Association
1 Battery march Park
Quincy, MA 02169-7471

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pa5010e

Table of Contents