STARTING/STOPPING
THE ENGINE
Starting the engine
1. The generator may be hard to start if a load is connected.
2. Turn the choke lever to the CLOSE position.
3. Turn the engine switch to the ON position.
4. Pull the starter grip until compression is felt, then pull briskly.
-1
Do not allow the starter grip to snap back. Return it slotily
by hand.
5. Turn the choke lever to the OPEN position as the engine warms up.
Stopping the engine
In an emergency:
l
To stop the engine in an emergency, move the engine switch to the OFF
position.
In normal use:
1. Turn off any AC electrical appliance, and disconnect DC battery charging
cables.
2. Move the engine switch to the OFF position.
23