Kenwood DNX890HD Quick Start Manual page 77

Return to the Top page
Setting Up
User interface
You can setup user interface parameters.
1
Touch [User Interface] in the list.
User Interface screen appears.
2
Set each item as follows.
Beep
Turns the key touch tone on or off.
Default is "ON".
Remote Sensor
Selects a remote control signal. Default is "ON".
Language
Select the language used for the control
screen and setting items. See Language setup
(P.89).
Text Scroll
Allows scrolling of text display on the source
control screen. Select from "Auto"/"Once"/"OFF".
Auto (Default): Scrolls the text automatically.
Once: Allows you to scroll the text only once
automatically when updated.
OFF: Does not scroll the text automatically.
Drawer Close
Sets whether to close the common menu (P.16)
automatically. Default is "Auto".
88 88
TEL Key Longer than 1 Second
You can set the operation performed when
the TEL key is pressed for 1 second. Select from
"Voice"/"V.OFF"/"R-CAM".
Voice (Default): Displays the Voice Recognition
screen. (P.82).
V.OFF: Turn the display off.
R-CAM: Switches to the rear view camera video
display.
Animation
Sets whether to display animation. Default is "ON".
Secondary
Sets whether to display the navigation
information in the audio screen or vice versa.
Default is "ON".
Language setup
1
Touch [SET] of [Language] in the User
Interface screen.
Language Setting screen appears.
2
Set each item as follows.
Select Mode
Selects the mode to select a language.
Easy (Default): Selects a language easily.
Advanced: Allows you to select languages for
respective items.*
Language Select
Selects a language.
* I f you select [Advanced] for Select Mode,
the following screen appears.
GUI Language Select:
Selects the display language used for the
control screen and so forth.
Navigation Language Select:
Selects the language used for navigation.
Text Language Select:
Selects the language used for tag text (song
information).
3
Touch [Enter].
NOTE
• To cancel the language setup, touch [Cancel].
Return to the Top page
Setting Up
Touch panel adjustment
1
Touch [Touch] in the System Menu
screen.
Touch Panel Adjustment screen appears.
2
Follow the instruction on the screen
and touch the center of each .
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
89