Custom Options Added To Sensor Unit Menu - Hasselblad H3D-ll User's Manual Supplement

Custom Options added to sensor unit menu

A new Custom Options section has been added to the sensor unit menu under the Settings
heading. Previously, navigating from the Settings heading brought you to the settings
list of User Interface, Camera, About and Default. See illustration below:
The new settings in this 'Custom Options' group are:
• Copy to I-Bank
When copying files to an ImageBank-II, you can choose whether you want to copy
files from the active batch only or all files from the whole card.
• I-B connection
When copying files to an ImageBank-II, you can choose whether you want to copy
files into the batch already present or create a new one.
• Tilt sensor
The tilt sensor sets the viewing orientation of captures when they appear in FlexColor.
In order to avoid unintentional orientation changes when the camera is pointing
straight up or down, for example, the tilt setting can be locked at:
Auto, Lock at 0 degrees, Lock at 90 degrees, Lock at 180 degrees and Lock at 270
degrees.
• Menu Ctrl.
This setting defines whether the front and rear control wheels are active or inactive
when navigating the sensor menu.
• Display
This setting allows you to turn the sensor unit display on when half-pressing the
shutter release button. Three options are available:
• Display ON by half-press
• Display OFF by half-press
• Toggle display by half-press
9
New menu item:
Custom Options
H3D-ll User Manual Supplement V6