Dc Operation - Honda EG2500X Owner's Manual

DC OPERATION
The DC terminals may ONLY be used for charging 12 volt automotive
type batteries.
Connecting the battery charging cables:
1. Before connecting the battery charging cable to a battery that is
installed in a vehicle, disconnect the vehicle ground battery cable
from the battery negative ( - ) terminal.
The battery gives off explosive gases; keep sparks, flames and
cigarettes away. Provide adequate ventilation when charging or using
batteries.
2. Connect the positive ( + ) battery charging cable to the battery
3. Connect the other end of the positive ( + ) battery charging cable to
positive (+) terminal.
the generator positive ( + ) terminal.
DC CIRCUIT
NEGATIVE POSITIVE TERMINAL
TERMINAL (RED)
4. Connect the negative (--) battery charging cable to the battery
5. Connect the other end of the negative
( - )
battery charging cable to
negative ( - ) terminal.
the generator negative
( - )
terminal.
19